A T International CL82401 User Manual

Quick reference guide  
Initial settings  
Quick start guide  
CL82101/CL82201/CL82301/CL82351/CL82401/CL82451/  
CL82501/CL82551/CL82601  
We recommend you program your telephone system before use.  
The following are a few examples of common features to set before using the  
telephone. Refer to the Handset settings and Answering system settings in  
the Abridged user’s manual or the online Complete user’s manual for detailed  
instructions on setting all telephone features.  
pDI/VOLUME  
Handset  
qCID/VOLUME  
• Show caller ID history.  
• Scroll down in menus.  
• Move cursor to the left when  
entering names or numbers.  
• Decrease listening volume when  
on a call, or decrease message  
playback volume.  
This quick start guide provides you with basic instructions only.  
For more complete instructions, refer to your Abridged user’s  
manual provided in the package, or see the online Complete  
• Show directory entries.  
• Scroll up in menus.  
• Move cursor to the right when  
entering names or numbers.  
• Increase listening volume when  
on a call, or increase message  
playback volume.  
Set date/time  
Set the date/time before using the answering system.  
1. MENU -> q or p -> Set date/time -> SELECT.  
Telephone base installation  
MENU/SELECT  
2. q or p to choose month, or enter the number -> SELECT.  
3. q or p to choose day, or enter the number -> SELECT.  
4. q or p to choose year, or enter the number -> SELECT.  
5. q or p to choose hour, or enter the number -> SELECT.  
6. q or p to choose minute, or enter the number -> SELECT.  
7. q or p to choose AM or PM -> SELECT.  
MUTE/DELETE  
Plug the power cord  
and telephone line  
cord into the jacks.  
Route the  
cords through  
the slot.  
• Show the menu.  
• Select an item or save an entry  
or setting while in the menu.  
• Mute the microphone during a  
call.  
• Delete the displayed entry while  
in the directory, call log or redial  
list.  
• Delete digits or characters when  
using the dialing keys.  
OFF/CANCEL  
• Hang up a call.  
• Press to cancel an operation,  
back up to the previous  
menu, or exit the menu display,  
or press and hold to return to  
idle mode  
• Press and hold in idle mode to  
erase missed call indicator.  
Record your own announcement  
Your outgoing announcement plays when calls are answered by the answering  
system. You can use the preset announcement to answer calls, or replace it  
with your own recorded announcement.  
1. MENU -> q or p -> Answering sys -> SELECT.  
2. SELECT to select Announcement.  
PHONE/FLASH  
Raise the  
antenna.  
• Make or answer a call.  
• Answer a call waiting call during  
a call.  
Charger installation  
1
EDIAL/PAUSE  
Press repeatedly to add or remove 1  
in front of the call log entry before  
dialing or saving it to the directory.  
3. q or p -> ecord annc -> SELECT.  
4. Facing the handset, record your announcement and press 5 to end recording.  
• Press repeatedly to view the last  
10 numbers dialed.  
• Press and hold to insert a dialing  
pause while entering numbers.  
Number of rings  
You can set the answering system to answer an incoming call after 2, 3, 4, 5 or  
6 rings, or toll saver. If you choose toll saver, the answering system answers a  
call after 2 rings if you have new messages, and after 4 rings when there are  
no new messages.  
If you want the built-in answering system instead of the voicemail to answer  
a call, you should set the answering system to answer a call at least 2 rings  
before the voicemail is set to answer. Contact your telephone service provider  
for information on your voicemail settings.  
1. MENU -> q or p -> Answering sys -> SELECT.  
2. q or p -> Ans sys setup -> SELECT.  
3. q or p -> # of rings -> SELECT.  
4. q or p -> Choose among 2, 3, 4, 5, 6 or Toll Saver -> SELECT.  
If you have  
TONE  
# (pound key)  
DSL high-speed  
Internet service,  
a DSL filter (not  
included) is  
Plug the other end  
of the telephone  
line cord into a  
telephone jack or  
a DSL filter.  
Press to switch to tone dialing  
temporarily during a call if you have  
pulse service.  
Press repeatedly to display other  
dialing options when reviewing a  
caller ID log entry.  
Plug the power  
adapter into an  
electrical outlet not  
controlled by a wall  
switch.  
/SPEA�E�  
EQ  
required.  
Switch between the speakerphone  
and handset.  
Change the audio quality to best  
suit your hearing.  
Caution: Use only the power adapter provided with this product. To obtain a replacement, visit  
our website at www.telephones.att.com or call 1 (800) 222-3111.  
In Canada, dial 1 (866) 288-4268.  
Push to talk  
Handset  
side view  
Battery installation  
Install the battery as shown below. Charge your handset(s) before initial use.  
The battery is fully charged after 10 hours of continuous charging.  
• Initiate a one-to-one or  
one-to-group broadcast.  
• Press and hold to broadcast  
to a group of handsets.  
Handset ringer volume  
You can set the ringer volume level to one of the six levels or turn the  
ringer off.  
1. MENU -> q or p -> ingers -> SELECT.  
2. SELECT to select inger volume -> SELECT.  
3. q or p to choose the desired level -> SELECT.  
1
2
3
Language  
Telephone base  
If you want to change the display language, or you have accidentally changed  
the language and want to switch it back to English, follow the steps below.  
1. MENU -> q 7 times -> SELECT twice.  
2. q or p to choose the desired language, or choose English if you want to  
change the display language to English -> SELECT.  
X/DELETE  
/ANSWEON  
• Delete the message  
currently playing.  
• Press twice to delete  
all old messages when  
in idle mode.  
Turn the built-in answering  
system on or off.  
Message counter  
Shows the number  
of messages or other  
answering system  
information.  
q/VOL/p  
• Adjust the listening  
volume during  
message playback.  
• Adjust the base ringer  
volume when in idle  
mode.  
1. Plug the battery  
connector securely  
into the socket inside  
the handset battery  
compartment, matching  
the color-coded label.  
Insert the supplied  
battery with the label  
THIS SIDE UP facing up  
as indicated.  
2. Align the cover  
flat against  
3. Charge the handset by  
placing it face forward  
in the telephone base  
or charger.  
/EPEAT  
• Repeat a message.  
• Press twice to play the  
previous message.  
the battery  
compartment,  
then slide it  
upwards until it  
clicks into place.  
/PLAY/STOP  
/S�IP  
Start or stop message  
playback.  
Skip to the next message.  
Use only the supplied rechargeable battery or replacement battery (model BT166342).  

Continental Electric CE23319 User Manual
CA Technologies R12 5 User Manual
Black Box Computer Hardware hardened pol poe ethernet extenders User Manual
B B Electronics Computer Hardware PES1A User Manual
AT T E1814B User Manual
Asus BW 14D1XT Internal Blu ray Writer BW 14D1XT User Manual
AMCC SIDECAR 3 User Manual
AEG 2490 D User Manual
Addonics Technologies AEIDDSAU User Manual
Addonics Technologies ADSACF N User Manual