Onkyo Stereo Receiver HT R593 User Manual

HT-R593  
AV RECEIVER  
Basic Manual  
Advanced Manual found here  
E
n
 
Connections  
Step 1:  
TV  
Personal computer  
I
HDMI cable  
To use the ARC function, connect to the ARC  
compatible HDMI jack of the TV and make an  
appropriate setting on the unit. See the section  
4 "HDMI Setup" of "Step 2: Setting Up".  
I
I
Blu-ray Disc/  
DVD player  
Game console  
Set-top box/Digital  
video recorder, etc.  
Satellite/Cable  
set-top box, etc.  
zꢀ  
Connection with a TV not supporting ARC  
To connect the TV and the unit, connect the HDMI OUT  
jack of the unit and the HDMI input jack of the TV with an  
HDMI cable. With this connection, it becomes possible to  
display the setting screen of the unit on the TV or transmit  
video/audio signals from the player to the TV. If your TV  
supports ARC (Audio Return Channel), it is possible to  
play the TV sound with the AV receiver's speakers with  
this connection only. If your TV does not support ARC,  
you need, in addition to the HDMI OUT jack connection, a  
digital optical cable connection between the digital audio  
out optical jack of the TV and the DIGITAL IN OPTICAL  
jack of the unit or an analog audio cable connection  
between the audio output jack of the TV and the TV/CD  
analog audio input jack of the unit.  
Connecting the TV and players  
1
TV  
Important: The power cord must be connected only after all  
other connections are completed.  
AUDIO  
OUT  
DIGITAL  
OPTICAL  
OUT  
HDMI cable connection  
The unit has many HDMI jacks on its rear panel and each  
of them corresponds to an input selector button of the same  
name on the front panel. For example, a Blu-ray Disc player  
will be connected to the IN 1 jack and the BD/DVD button  
on the front panel will be used to listen to the playback  
sound (if the player is CEC compliant, input will be switched  
automatically). If you add another Blu-ray Disc player, you  
can use any other jack than IN 1. It is possible to change  
assignment of the input jacks and input selector buttons.  
For how to make settings, see the Advanced Manual.  
Select an appropriate connection  
¼ꢀ  
for your TV.  
The unit supports the HDMI Through function that allows  
transmission from players to the TV even if the unit is in  
standby.You have to modify the settings to enable the input  
selection link with CEC compliant device, connection with  
 
3
Step 1: Connections  
ARC compatible TV, and HDMI Through function. See the  
section 4 "HDMI Setup" of "Step 2: Setting Up".  
rꢀ To play 4K or 1080p video, use the high speed HDMI  
cable.  
Audio signal connection  
1 Digital connection: Use a digital optical cable  
(OPTICAL) or digital coaxial cable (COAXIAL) for  
connection with a player.  
Digital optical cable (OPTICAL)  
Connecting Components without HDMI  
As the digital in optical jack of the unit has a  
¼ꢀ  
cover, push in the cable against the cover as it is  
turned inside.  
If your AV component does not have HDMI jack, use an  
available jack of your component for cable connection with  
this unit. Just as the HDMI jacks, other jacks on this unit have  
a preassigned input selector button on the front panel. See  
the name of the input selector button shown with the jack  
when connecting the device.  
Digital coaxial cable (COAXIAL)  
2 Analog connection: Use an analog audio (RCA) cable  
for connection with a player.  
To enjoy multi-zone playback of audio of a CD player  
or such other player without HDMI output jack, you  
need to use the analog audio (RCA) cable to connect  
the corresponding jacks of the player and this unit. For  
details on the multi-zone function, see the section 6  
"Using the multi-zone function" of "Step 3: Playing Back".  
1
2
3
4
Analog audio (RCA) cable  
Video signal connection  
3 Use a component video cable to connect a TV  
with component video input jacks and a player with  
component video output jacks.  
rꢀ When a component video cable is used for  
connecting the unit and the player, the unit and TV  
must also be connected with a component video  
cable.  
Component video cable  
Its transmitted video has higher quality than that  
¼ꢀ  
of composite video cable.  
If the connected turntable does not have built-in  
Use a composite video cable to connect a TV with  
composite video input jack or a player with composite  
video output jack.  
4
audio equalizer, you need to install an external audio  
equalizer between the unit and the turntable. Contact the  
manufacturer for more information.  
Composite video cable  
 
4
Step 1: Connections  
Front R  
Front L  
Connecting speakers  
2
Center  
Important: The power cord must be connected only after all  
other connections are completed.  
12  
3
6
45  
Front speakers  
Center speaker  
1 2  
3
Surround speakers  
Subwoofer  
4 5  
6
rꢀ The position and size of the speakers is an image.  
rꢀ Up to two subwoofers can be connected.  
rꢀ To use the multi-zone function, refer to the section 6  
"Using the multi-zone function" of "Step 3: Playing Back".  
It is ideal to install the front speakers and center speaker  
at the height not too far from that of the screen. As for the  
surround speakers, it is recommended to install at the  
position slightly backward of the listening position and  
higher than the listener's ears, since it is preferable to  
obtain a diffused sound rather than a direct sound. As a  
bass sound reproduced by subwoofer is less directional,  
it is possible to place it at any position. Consider the best  
installation position where a bass sound can be clearly  
heard by listening to actual playback.  
Surround R  
Surround L  
Subwoofer with built-in  
power amplifier  
Cut and remove the plastic coating from the end of the  
speaker cable, twist the core and connect it to the terminal.  
Make correct connection between the unit's jacks and  
speaker's jacks (+ to + and - to -) for each channel. If  
connection is wrong, a bass sound may become poor due  
to reverse phase.  
1/2"-5/8"(12-15 mm)  
Importantꢄꢀ%QPPGEVꢀURGCMGTUꢀYKVJꢀꢂꢀŝꢀVQꢀꢁꢂꢀŝꢀKORGFCPEGꢃꢀ  
Using a speaker with less impedance than the supported  
value may result in failure.  
¼
The positive (+) speaker terminals of Home Theater System are color  
coded for identification purpose. Connect the colored cable to the  
positive (+) speaker terminal in the same color as the cable.  
 
5
Step 1: Connections  
Connect LINE INPUT jack on the subwoofer and PRE OUT  
SUBWOOFER jack on this unit as described in the figure.  
Network connection  
Other connections  
3
¼
Up to two subwoofers can be connected. If the subwoofer has a cut-off  
You can enjoy Internet radio and DLNA by connecting the  
unit to LAN. The unit can be connected to the router with  
an Ethernet cable or to the wireless LAN router with Wi-  
Fi connection. In case of wired connection, connect the  
Ethernet cable to the Ethernet port. For Wi-Fi setup, see  
the section 3 of "Step 2: Setting Up".  
filter selection switch, set to DIRECT. If the subwoofer does not have a  
cut-off filter selection switch but has a cut-off frequency adjusting dial,  
turn it to the maximum frequency. If your subwoofer does not have built-in  
power amplifier, you can connect a power amplifier between the unit and  
the subwoofer.  
AM/FM antenna connections  
Connect the antennas to listen to AM/FM broadcast. When  
listening to the broadcast for the first time, adjust the  
antenna position and orientation to get the best reception.  
rꢀ The speaker setting is 5.1 ch at the time of purchase.You  
can change it manually or by using automatic speaker  
setting.  
Internet radio  
rꢀ Short-circuiting the + cable and - cable or contacting the  
cable core to the rear panel of the unit may cause failure.  
Also do not connect two or more cables to one speaker  
jack or one speaker to several jacks.  
AM loop antenna (supplied)  
PC  
Router  
Indoor FM antenna  
(supplied)  
NAS  
Fix with a tack on  
the wall.  
(North American model)  
(Asian model)  
Headphones connection  
When using commercially available banana plugs:  
tighten the speaker terminals to the end and then insert  
the banana plugs. Do not insert the cable core directly into  
the center hole of the speaker terminal. (North American  
model)  
Connect stereo headphones with a standard plug (1/4 inch  
or ø 6.3 mm) to the PHONES jack. Sound from the speakers  
will be off while you are using the headphones.  
rꢀ If you selected any other listening mode than Pure Audio  
(Asian model), Stereo, Mono and Direct, connecting  
headphones will switch the listening mode to Stereo.  
Assemble the AM loop antenna (supplied).  
 
6
Setting Up  
Step 2:  
Place the speaker setup microphone at the  
measurement position .  
rꢀ Correct measurement will not be possible if the  
microphone is held by hand. It is desirable that the  
microphone be placed on a stand at the height  
of listener's ears. Measurement is not possible if  
headphones are being used.  
1.  
Turning the power on  
1
Connect the power cord to the outlet. Press ON/  
z
STANDBY on the main unit or RECEIVER on the remote  
z
controller to turn the unit on or to standby mode.  
TV  
z Operation:You can set up by viewing the guidance  
displayed on the TV screen. To display the guidance, you  
need to make HDMI connection between the unit and  
TV. Select the item with the cursor buttons of the remote  
controller and press ENTER to confirm your selection. To  
return to the previous screen, press RETURN. To return to  
the Home menu, press HOME.  
: Listening area  
: Measurement position  
with microphone  
rꢀ When the unit is turned on, a large instantaneous current  
may flow affecting functionality of the computer and other  
devices. It is recommended to use a separate outlet from  
that for the computer or such other sensitive devices.  
Connect the speaker setup microphone to the  
SETUP MIC jack on the unit.  
2.  
SETUP MIC jack  
Firmware update notification: If the unit is connected via  
LAN and there is firmware update available, the "Update  
New F/W" message will appear. Press the  
/
buttons on  
S T  
the remote controller to select whether to update or not  
and press ENTER to confirm your selection. For details on  
firmware update, see the Advanced Manual.  
Making automatic speaker setting  
2
Speaker setup  
microphone  
The AccuEQ Room Calibration function, our proprietary  
technology, collects the test tones coming from each  
speaker with the supplied speaker setup microphone and  
performs automatic setting of the number of speakers,  
volume level, each speaker's optimum crossover  
frequencies, and distance from the primary listening  
position. Distortion caused by difference of room acoustic  
environment will also be corrected to produce clear, well-  
balanced sound.  
 
7
Step 2: Setting Up  
Follow the guidance displayed on the TV screen.  
You can set up by viewing the guidance displayed on the  
TV screen. To display the guidance, you need to make  
HDMI connection between the unit and TV. Select the  
item with the cursor buttons of the remote controller and  
press ENTER to confirm your selection.  
3.  
rꢀ The subwoofer sound may not be detected since  
it is extremely low frequencies. If "No" is shown for  
"Subwoofer" in the measurement result screen,  
raise the subwoofer volume to around the half of  
its maximum volume and make its frequency to the  
maximum level.  
rꢀ "12. Network Setup" becomes selectable after the  
network starts up even if it cannot be selected first. It  
may take about a minute to start up.  
Select "Wi-Fi" with the cursor buttons and select "On" to  
display "Wi-Fi Setup".  
Select "Start" in "Wi-Fi Setup" with the cursor buttons  
and press ENTER.  
4
5
On the screen showing "AccuEQ" is "On", press  
ENTER.  
The settings will be applied to all the inputs.  
6.  
7.  
Select the SSID of the access point to be connected  
with the cursor buttons and press ENTER.  
When the SSID of the access point appears on the TV  
screen, select the desired access point.  
rꢀ If you changed the initial setting of the access point to  
skip password entry, step 4 starts automatically.  
rꢀ If you changed the initial setting of the access point  
to hide the SSID, see "When the access point is not  
displayed".  
2.  
AccuEQ Room Calibration  
Subwoofer  
<
Yes  
>
When "Please unplug setup microphone." is  
displayed, disconnect the microphone.  
rꢀ If you change the speaker positions, the room furniture  
layout or the number of speakers, perform automatic  
speaker setting again.  
rꢀ If there is an error message, follow the on-screen  
instruction to remove the error cause.  
[ENTER] : Next  
Select and set the authentication method.  
3.  
The test tones sound from the connected speaker  
and automatic speaker setting starts.  
The microphone measures the test tones. Measurement  
will be made twice for each speaker. It takes several  
minutes to be completed.  
rꢀ Each speaker generates test tones at high volume  
level during measurement. Keep the room as quite  
as possible during measurement. Measurement  
may be interrupted if there is ambient noise or radio  
frequency interference. Close the window and turn off  
the home appliance and fluorescent light.  
4.  
Making Wi-Fi setting  
3
Wi-Fi Setup  
Please select the authentic  
method.  
Items to be checked before starting the procedure  
Wi-Fi connection requires an access point such as  
wireless LAN router (¼). Write down the SSID and  
password (key) of the access point if they are shown  
in the label of the main body. If the access point has  
an automatic setting button (may be called differently  
according to the manufacturer), you can set up  
without inputting the password. For how to use the  
automatic setting button of the access point, refer to  
its instruction manual.  
Enter Password  
Push Button  
PIN code  
rꢀ To cancel measurement on the way, disconnect the  
microphone plug.  
When the screen above is displayed, select and set one  
of the three authentication methods: "Enter Password",  
"Push Button" and "PIN code". See below for details of  
and how to set each method.  
When the measurement is completed, the  
measurement result is displayed.  
5.  
¼ꢀ  
The unit supports Wi-Fi connection with 2.4 GHz  
access point.  
Enter Password: Enter the password of the access point to  
z Operation:You can set up by viewing the guidance  
displayed on the TV screen. To display the guidance, you  
need to make HDMI connection between the unit and  
TV. Select the item with the cursor buttons of the remote  
controller and press ENTER to confirm your selection. To  
return to the previous screen, press RETURN.  
establish connection.  
AccuEQ Room Calibration  
Select "Enter Password" with the cursor buttons and  
press ENTER.  
1
<-Review Speaker Configuration->  
Subwoofer  
Front  
Center  
Surround  
Crossover  
:
:
:
:
:
Yes  
Small  
Small  
Small  
150 Hz  
2 Enter the password (¼) on the keyboard screen, select  
"OK" with the cursor buttons and press ENTER.  
rꢀ In some case, the key board screen is displayed  
automatically instead of authentication screen  
depending on access point device.  
Start "Wi-Fi Setup".  
Press RCV on the remote controller and then press  
1.  
1
Save  
Cancel  
¼ꢀ  
To switch uppercase/lowercase, select "Shift" and press ENTER.  
HOME.  
Select "Left" or "Right" and press ENTER to move the cursor to  
the selected direction. Select "BS" and press ENTER to delete  
the character at the left of the cursor position. To select whether to  
mask the password with "*" or display it in plain text, press D on the  
remote control. Press + 10 on the remote controller to enable the  
"Shift" function and CLR to delete all the input characters.  
Select "Setup" with the cursor buttons and press  
ENTER.  
Select "12. Network Setup" with the cursor buttons and  
press ENTER.  
2
3
d c  
on the remote controller to check the settings.  
Press  
/
Pressing ENTER when "Save" is selected will save the settings.  
 
8
Step 2: Setting Up  
If the security method of the access point to be  
connected is WEP, select "Default Key ID", select "OK"  
and press ENTER.  
3
HDMI Through  
HDMI Setup  
4
The function allows transmission from players to the TV  
even if the unit is in standby. Setting the HDMI CEC (RIHD)  
setting mentioned above to "On" can enable this setting  
automatically. It is also necessary to make the HDMI linked  
system setting on the TV. See the TV's instruction manual  
for details.  
rꢀ Although enabling the HDMI Through function increases  
power consumption during standby, the unit automatically  
enters the HYBRID STANDBY mode that can minimize  
the increase of power consumption by keeping only the  
minimum circuits active.  
The unit supports the linked system function such as power  
on/off link when connected via HDMI cable with a CEC  
(Consumer Electronics Control) compliant TV or player.You  
need to change the initial setting to use the linked system  
function, HDMI Through function and ARC (Audio Return  
Channel) function.  
Push Button: Use the automatic setting button of the  
access point to establish connection.  
Select "Push Button" with the cursor buttons and press  
ENTER.  
Hold down the automatic setting button of the access  
point for the necessary seconds, select "OK" with the  
cursor buttons and press ENTER.  
1
2
z Operation:You can set up by viewing the guidance  
displayed on the TV screen. To display the guidance, you  
need to make HDMI connection between the unit and  
TV. Select the item with the cursor buttons of the remote  
controller and press ENTER to confirm your selection. To  
return to the previous screen, press RETURN.  
PIN code: Select this method when the automatic setting  
button of the access point is beyond the reach. Select "PIN  
code" with the cursor buttons and press ENTER to display  
the 8-digit PIN code. Register the displayed PIN code to the  
access point, select "OK" with the cursor buttons and press  
ENTER. For how to register the PIN code to the access  
point, refer to its instruction manual.  
ARC (Audio Return Channel)  
Simple connection to the ARC compatible TV using a  
single HDMI cable allows to listen to the TV sound from the  
speakers connected to the unit. To use the ARC function,  
connect the unit to the ARC compatible HDMI jack of the  
TV. Then, set the HDMI CEC (RIHD) mentioned above to  
"On" on the unit, and make the following setting.  
HDMI CEC (RIHD)  
Establish connection.  
4.  
The connection process starts and the Wi-Fi indicator  
on the left of the unit's display starts flashing. When  
connection has been established, the Wi-Fi indicator  
changes from flashing to staying lit. If the Wi-Fi indicator  
does not stay lit, connection has not been established.  
Make the setting again. If "Push Button" does not work,  
try "Enter Password".  
Press RCV on the remote controller and then press  
HOME.  
Select "Setup" with the cursor buttons and press  
ENTER.  
Select "11. HDMI Setup" with the cursor buttons and  
press ENTER.  
Select "Audio Return Ch" with the cursor buttons  
and select "Auto".  
1.  
2.  
3.  
4.  
When the access point is not displayed  
c
Select "Other..." with  
on the remote controller and  
Turning the TV to standby mode will turn the unit to  
standby mode.  
On the TV side, it is possible to set whether to output  
audio from the speakers connected to the unit or from  
the TV's speakers.  
Starting playback of a CEC compliant player/recorder will  
automatically switch the unit's input to the HDMI input of  
the player/recorder. If the unit is in standby mode, it will  
automatically be turned on.  
press ENTER to display the keyboard screen. Input  
the SSID and password. Make the following settings  
according to the router setting.  
WPA/WPA2 method  
Select "WPA" or "WPA2" in "Security method", select  
"OK" and press ENTER.  
Audio output of connected players  
To enjoy digital surround sound including Dolby Digital  
and DTS, audio output should be set to "Bitstream  
output" on the connected blu-ray disc player or other  
devices. If the TV does not support bitstream signals,  
set the audio output to "PCM output" on the player to  
listen to the audio from the TV's speakers. For how  
to set the player, see the instruction manual of the  
player. Some settings of the blu-ray disc player may  
prevent reproduction of DTS-HD Master Audio. In  
that case, turn "BD video supplementary sound" (or  
secondary sound) to "Off" and try again.  
WEP method  
Select "WEP" in "Security method", and select  
"Default Key ID". Then select "OK" and press ENTER.  
rꢀ If encryption setting has not been made on the  
wireless LAN router, select "None" in "Security  
method", select "OK" and press ENTER.  
Press RCV on the remote controller and then press  
HOME.  
Select "Setup" with the cursor buttons and press  
ENTER.  
Select "11. HDMI Setup" with the cursor buttons and  
press ENTER.  
Select "HDMI CEC (RIHD)" with the cursor buttons  
and select "On".  
1.  
2.  
3.  
4.  
 
9
Playing Back  
Step 3:  
1
RECEIVER button: Turns the unit on or into standby  
z
Playing the player and TV  
mode.  
1
1
2
2 RCV button: Switches the remote controller to the  
mode for operating this unit.  
3 REMOTE MODE/INPUT SELECTOR buttons: Switches  
the input to be played.  
8
9
3
4 Cursor buttons and ENTER button: Moves the cursor  
and confirms the selection.  
5 Q SETUP button: Displays the Quick Setup menu that  
allows you to set the frequently used functions including  
input selection and volume adjustment.  
z To control the unit: The remote controller may be in the  
remote mode that enables control of other devices. In the  
state of remote mode, you will not be able to operate this  
unit. When you operate the unit, operate it from back to (a  
mode in which to operate this unit) RECEIVER mode by  
F
6
Listening mode buttons: Allows you to select the  
listening mode.  
7
8
DIMMER button: Switches the brightness of the display.  
ZONE2 button: For use when the unit is connected with  
a pre-main amplifier in a separate room and sound is  
played there.  
pressing  
RCV always.  
2
4
5
Turning the power on.  
Press  
the power on.  
rꢀ You need to change the input setting of the TV to the  
one for connection with this unit. Use the TV's remote  
controller.  
1.  
G
H
RECEIVER on the remote controller to turn  
1 z  
9 MUTING button: Temporarily mutes audio.  
VOLUME buttons: Allows you to adjust the volume. This  
button also cancels the muting.  
RETURN button: Returns the display to the previous state.  
HOME button: Displays the Home menu that allows you to  
make advanced settings and use Internet radio and DLNA.  
DISPLAY button: Switches the information on the display.  
F
G
H
Select the input of the unit and start playback on the  
player or TV.  
rꢀ Press  
player has been assigned. Press TV/CD to play the  
TV's sound.You can also use the input selector  
buttons on the main unit.  
rꢀ Input will automatically be selected if the TV or player  
is CEC compliant and connected to the unit with  
HDMI cable.  
2.  
6
7
I
INPUT SELECTOR to which the desired  
3
rꢀ The buttons other than  
-
1 I  
are for operating other  
devices.  
I
Select the desired listening mode.  
3.  
4.  
Press the  
listening mode buttons to switch the  
6
mode so that you can enjoy different listening modes.  
For details about the listening modes, see "Listening  
modes".  
Adjust the volume with  
.
F
 
10  
Step 3: Playing Back  
"Bass": Allows you to enhance or moderate the bass.  
"Treble": Allows you to enhance or moderate the treble.  
"PM Bass": Allows you to keep the clear midrange and  
effectively enhance the bass.  
Listening modes  
Listening to AM/FM Radio  
2
Select the desired mode by switching and listening actual  
sound in different modes. The selectable listening modes  
depend on the format of the input signals.  
Auto tuning method is explained in Basic Manual. For more  
details on AM/FM radio station, see Advanced Manual.  
Muting Temporarily: Press MUTING on the remote  
controller. To cancel the muting, press MUTING again, or  
press VOL / .  
Press AM or FM on the unit to select either "AM" or  
"FM".  
Press TUNING MODE on the unit so that the "AUTO"  
indicator on the unit's display lights.  
1.  
2.  
3.  
MOVIE/TV:You can select a listening mode suitable for  
movies and TV programs.  
Changing the Display Brightness: Press DIMMER on  
the remote controller several times to select the desired  
brightness.  
MUSIC:You can select a listening mode suitable for music.  
GAME:You can select a listening mode suitable for games.  
Press TUNING on the unit.  
The automatic search for a radio station starts.  
Searching stops when one is found. When tuned into a  
radio station, the " TUNED " indicator on the unit's  
display lights. The "FM STEREO" indicator lights if the  
radio station is an FM radio station.  
Checking the Input Format: Press DISPLAY on the  
remote controller several times to switch the display of the  
main unit in order of:  
STEREO:You can select a listening mode for stereo and all  
channel stereo sources.  
PURE AUDIO (main unit only) (Asian model): The display  
and analog video circuit is cut off to provide purer sound.  
rꢀ For details on the listening modes, see the Advanced  
Manual.  
Input source &  
volume  
TUNED  
AUTO  
"Direct" for playing the input signals as-is  
Selecting this mode allows the input signals to be  
played as they are. For example, 2 ch signals of music  
CD will be played in stereo, 5.1 ch signals in 5.1 ch,  
and Dolby Digital signals of blu-ray disc or DVD in the  
Dolby Digital sound field according to the specified  
number of channels.  
Listening  
mode  
FM STEREO  
(Actual display depends on the country.)  
Signal  
format  
Registering a Radio Station: It allows you to register up to  
40 of your favorite AM/FM radio stations.  
1. Tune into the AM/FM radio station you want to register.  
2. Press MEMORY on the unit so that the preset number  
on the display flashes.  
3. Repeatedly press PRESET on the unit to select a  
number between 1 and 40 while the preset number is  
flashing (about 8 seconds).  
Sampling  
frequency  
Other useful functions  
rꢀ If "Dolby D 5.1" is displayed in signal format, the  
Dolby Digital 5.1 ch signals are being input. When  
listening to AM/FM radio, the band, frequency and  
preset number are displayed.  
Playing Video and Audio from Different Sources: It  
is possible to play audio and video from different sources.  
For example, you can play audio from the CD player and  
video from the BD/DVD player. In this case, press BD/DVD  
and then TV/CD. Then start playback on the BD/DVD player  
and CD player. This function is effective when an input with  
audio only has been selected (TV/CD, AM or FM in the  
initial setting).  
4. Press MEMORY on the unit again.  
When registered, the preset number stops flashing.  
Repeat this procedure for all of your favorite AM/FM  
radio stations. Press PRESET or CH +/- to select  
the registered radio station.  
Adjusting Sound Quality: It is possible to enhance  
or moderate the bass and treble of front speakers. Press  
TONE on the main unit several times to select the desired  
setting from "Bass", "Treble", and "PM Bass" (Phase  
Matching Bass), and adjust with +/-.  
rꢀ It cannot be set if the listening mode is Pure Audio (Asian  
model) or Direct.  
 
11  
Step 3: Playing Back  
rꢀ It may take about a minute until connection is established  
when the unit is on since the Bluetooth function takes  
some time to start up.  
rꢀ If the volume setting on the Bluetooth-enabled device is  
low, the sound will not be output from this unit.  
rꢀ Due to the characteristics of Bluetooth wireless  
technology, the sound produced on this unit may slightly  
be behind the sound played on the Bluetooth-enabled  
device.  
NAS device connected to the network. Select the server  
with the cursors, select the desired music file and press  
ENTER to start playback.  
Connecting and playing the Bluetooth-  
enabled device  
3
Home Media:You can play music files in a shared folder  
on the PC or NAS device connected to the network.  
Select the server with the cursors, select the desired  
music file and press ENTER to start playback.  
You can wirelessly enjoy music files stored in a smartphone  
or other Bluetooth-enabled device. The coverage area is  
48 feet (15 meters).  
rꢀ "Network Service" becomes selectable after the network  
starts up even if it cannot be selected first. It may take  
about a minute to start up.  
USB: Select "USB" in the TV screen and connect a  
Using the Home menu  
4
USB storage device to the USB port on the front panel. On  
the TV screen, select the desired folder or music file with  
the cursors of the remote controller and press ENTER to  
confirm and start playback.  
rꢀ "USB" becomes selectable after the USB function starts  
up even if it cannot be selected first. It may take about a  
minute to start up.  
In the Home menu, you can make advanced settings and  
use Internet radio and DLNA. For more information about  
the operation, see the Advanced Manual.  
rꢀ The Bluetooth-enabled device needs to support the  
A2DP profile.  
rꢀ Note that connection is not always guaranteed with all  
Bluetooth-enabled devices.  
Press RCV on the remote controller and then press  
HOME.  
1.  
The Home menu displays on the TV screen.You can  
also use the HOME button on the main unit.  
Sleep Timer: Select to turn the unit into standby mode  
automatically when the specified time elapses.  
Pairing  
Pairing is necessary when using the Bluetooth-enabled  
device for the first time. Before starting the procedure, learn  
how to enable the Bluetooth setting function and to connect  
with other devices on the Bluetooth-enabled device.  
InstaPrevue: Select to preview videos input from the HDMI  
input jacks collectively in a single screen. The screen has a  
main window (current input video) and sub windows (other  
input videos). To switch the current input, select the desired  
sub window with the cursor buttons and press ENTER.  
rꢀ A black sub window is shown for the input with no video  
signals.  
Home  
Setup  
Network Service  
USB  
Sleep Timer  
InstaPrevue  
Press BLUETOOTH on the remote controller.  
The unit enters the pairing mode and the BLUETOOTH  
indicator starts flashing.  
1.  
rꢀ "InstaPrevue" cannot be selected if the video is being  
input from HDMI IN 6 or there is no signal from the input  
currently selected.  
rꢀ Depending on video signals, the picture may not be  
properly rendered on the preview thumbnails.  
Select the item with the cursor buttons of the  
remote controller and press ENTER to confirm your  
selection.  
To return to the previous screen, press RETURN. To  
return to the Home menu, press HOME.  
2.  
While the BLUETOOTH indicator is flashing,  
complete connection on the Bluetooth-enabled  
device in the nearby area within about 2 minutes.  
If the name of this unit is displayed on the Bluetooth-  
enabled device's display, select this unit. Paring will end  
after a short time.  
rꢀ If a password is requested, enter "0000".  
rꢀ When connecting the unit to any other Bluetooth-  
enabled device, start pairing by pressing and holding  
BLUETOOTH until the BLUETOOTH indicator starts  
flashing. This unit can store the data of up to ten paired  
devices.  
2.  
Setup:You can change the assignment of input terminals  
and input selector buttons and also make various speaker  
settings and other advanced settings.  
Network Service: Select to use Internet radio services  
and the DLNA function. When you connect the unit to the  
network and press ENTER, the network service screen  
will be displayed on the TV. On the TV screen, select the  
desired service or music file with the cursors of the remote  
controller and press ENTER to confirm and start playback.  
Playing sound of the Bluetooth-enabled device  
Internet radio service:You can listen to TuneIn or such  
If the unit is on and the Bluetooth-enabled device is  
connected, the input will be automatically switched to  
BLUETOOTH. Play music in this state.  
other Internet radio stations registered in advance.  
DLNA :You can play music files stored in the PC or  
 
12  
Step 3: Playing Back  
AccuEQ: Disables the sound field correction settings  
set in the automatic speaker setting. The setting can be  
separately set to each input.  
rꢀ The setting cannot be selected if the automatic  
speaker setting has not been performed.  
rꢀ It cannot be set if headphones are connected or the  
listening mode is Pure Audio (Asian model) or Direct.  
Using Quick Setup menu  
5
In the Quick Setup menu, you can set frequently used  
functions including input selection and volume adjustment.  
Press Q SETUP on the remote controller.  
The Quick Setup menu is displayed on the connected  
TV's screen.  
1.  
Late Night: Make small sounds to be easily heard. It  
is useful when you need to reduce the volume while  
watching a movie late night.You can enjoy the effect  
on Dolby Digital, Dolby Digital Plus and Dolby TrueHD  
sources only.  
rꢀ Turning the unit to standby mode will set the setting  
to "Off". In case of Dolby TrueHD, the setting will be  
set to "Auto".  
Quick Setup  
Input  
Audio  
Information  
Listening Mode  
Music Optimizer : Improve the quality of the  
compressed audio. Playback sound of lossy  
compressed files such as MP3 will be improved. The  
setting can be separately set to each input.  
rꢀ The setting is effective in the signals of 48 kHz or  
less. The setting is not effective in the bitstream  
signals.  
Select the item with the cursor buttons of the  
remote controller and press ENTER to confirm your  
selection.  
2.  
To return to the previous screen, press RETURN.  
Input: Select the input and check the assignment of input  
selector buttons.  
rꢀ It cannot be set if the listening mode is Pure Audio  
(Asian model) or Direct.  
Audio:You can change various audio settings including  
the ones for adjusting audio quality and speaker level.  
rꢀ You cannot select this item when audio is played from the  
TV's speakers.  
Cinema Filter: Adjust the soundtrack that was  
processed to enhance its high pitch range, in order to  
make it suitable for home theater.  
rꢀ This function can be used in the following listening  
modes: Multichannel, Dolby Digital, Dolby Digital Plus,  
Dolby TrueHD, DTS, DTS-HD High Resolution Audio,  
DTS-HD Master Audio, DTS Express, DTS 96/24,  
Dolby PL II Movie, DTS NEO:6 and Neo:6 Cinema.  
A/V Sync: If the video is behind the audio, you can  
delay the audio to offset the gap.  
rꢀ It cannot be set if the input is "NET", "USB" or  
"BLUETOOTH".  
rꢀ It cannot be set if the listening mode is Pure Audio  
(Asian model) or Direct.  
Information: Display the audio information.  
Bass,Treble: Adjust volume of the front speaker.  
rꢀ It cannot be set if the listening mode is Pure Audio  
(Asian model) or Direct.  
Listening Mode: Select the listening mode from the  
categories of "MOVIE/TV", "MUSIC" and "GAME".  
rꢀ It cannot be set when audio is played from the TV's speakers.  
PM Bass (Phase Matching Bass): Suppress phase  
shift in the midrange to enhance bass sound. Thus  
smooth and powerful bass sound can be obtained.  
rꢀ It cannot be set if the listening mode is Pure Audio  
(Asian model) or Direct.  
Subwoofer Level, Center Level: Adjust the speaker  
level while listening to the sound. The adjustment you  
made will be reset to the previous status when you turn  
the unit to standby mode.  
rꢀ The speakers cannot be adjusted if they have been  
set to "No" or "None" in "Sp Config".  
 
13  
Step 3: Playing Back  
Making multi-zone connection  
Performing multi-zone playback  
Using the multi-zone function  
6
Press ZONE2 on the remote controller, point the  
remote controller at the unit and press RECEIVER.  
Connect the ZONE 2 LINE OUT jacks of the unit and the  
line-in jacks of the pre-main amplifier in a separate room  
with an analog audio (RCA) cable.  
1.  
z
You can connect the unit with a pre-main amplifier or  
speakers in a separate room and playback audio sources  
from an external device connected to the analog audio  
input jacks of the unit. And also, you can enjoy sources  
of "NET", "USB", "BLUETOOTH" as well as AM/FM  
broadcasting. It is also possible to play the sound from  
different analog connected devices in the main room and  
separate room.  
rꢀ As for the "NET", "USB" and "BLUETOOTH", you cannot  
select different inputs for the main room and separate  
room. For example, if "NET" has been selected in the  
main room and then "USB" is selected on the pre-main  
amplifier in the separate room, the input in the main room  
will change to "USB" accordingly.  
"Z2" lights on the unit and the ZONE function is enabled.  
(ZONE 2 is now on.)  
Press ZONE2 on the remote controller again and  
press INPUT SELECTOR of the input to be played in  
a separate room.  
2.  
To play the same source in the main room and separate  
room, hold down ZONE2 for approximately 3 seconds.  
The volume should be adjusted with the pre-main  
amplifier used in the separate room.  
To control on the main unit: Press ZONE2 and within  
ꢅ|UGEQPFUꢆꢀRTGUUꢀVJGꢀKPRWVꢀUGNGEVQTꢀDWVVQPꢀQHꢀVJGꢀKPRWVꢀVQꢀDGꢀ  
played in a separate room. To play the same source in the  
main room and separate room, press ZONE2 twice.  
rꢀ When listening to AM/FM broadcasting, you cannot  
select different stations for the main room and separate  
room. Therefore broadcasting of the same station will be  
heard in the both rooms.  
To turn off the multi-zone function: Press ZONE2 on the  
remote controller and press RECEIVER. Alternatively  
z
press OFF on the main unit.  
rꢀ Multi-zone playback cannot be performed if a player is  
connected to HDMI jack using HDMI cable or OPTICAL/  
COAXIAL jack using digital cable. Connect the players  
using analog audio cable for multi-zone playback. Analog  
audio output setting may be necessary on the player.  
rꢀ If ZONE 2 is on, power consumption during standby  
becomes larger than normal.  
rꢀ If ZONE 2 is turned on when the listening mode of the  
main room is Pure Audio, it will automatically switch to  
Direct. (Asian model)  
Connecting with Player  
To use a Blu-ray Disc player or other players as the source  
of multi-zone audio output, it is necessary to connect the  
RCA audio output jacks of the player and the analog audio  
input jacks of the unit using the analog audio (RCA) cable.  
AUDIO  
OUT  
rꢀ While ZONE 2 is on, the RI linked system function  
(interlink between Onkyo components) is disabled.  
rꢀ Multi-zone audio output is not possible if the player and  
the unit are connected only via HDMI cable or digital  
cable.  
rꢀ Some players require analog audio output setting.  
 
14  
1
2
3 4  
56  
7
8
9
F
G
H
I
J
K
L
(Asian model)  
(Asian model)  
N
O
P
Q
R
S
T
M
Front Panel  
MEMORY button: Registers or deletes a station.  
TUNING MODE button: Switches the tuning mode.  
DISPLAY button: Switches the information on the  
display.  
PHONES jack: Stereo headphones with a standard plug  
are connected.  
TONE and Tone Level buttons: Adjusts the high tone  
and low tone.  
Input selector buttons: Switches the input to be  
played.  
AUX INPUT AUDIO/VIDEO jacks: A video camera or  
such other device is connected.  
USB port: A USB storage device is connected so that  
music files stored in it can be played.  
SETUP MIC jack: The supplied speaker setup  
microphone is connected.  
HYBRID STANDBY indicator: Lights if the unit enters  
standby mode when the HDMI Through, network  
standby or Wakeup from Bluetooth function is enabled.  
1
2
ON/STANDBY button: Turns the unit on or into  
F
G
H
N
O
P
Q
R
S
T
z
standby mode.  
BLUETOOTH indicator: Flashes while pairing with a  
Bluetooth-enabled device is in progress and stays lit  
when pairing is completed.  
ZONE 2 button: Controls the multi-zone function.  
Wi-Fi indicator: Lights when the unit is connected to  
the wireless LAN router.  
HOME button: Displays the Home menu.  
I
J
d
c
Cursor buttons, lTUNINGj button, PRESET  
3
4
button and ENTER button: Moves the cursor and  
confirms the selection. When listening to AM/FM  
Remote control sensor: Receives signals from the  
remote controller.  
broadcasting, tune in to the station with lTUNINGj or  
5
d
c
.
select the registered station with PRESET  
RETURN button: Returns the display to the previous  
state.  
OFF button: Switches the multi-zone function to off.  
6
K
7 Display  
MASTER VOLUME: Allows you to adjust the volume.  
8 LISTENING MODE buttons: Allows you to select the  
L
M
MUSIC OPTIMIZER button  
(North  
and indicator  
listening mode.  
DIMMER button (North American model): Switches  
the brightness of the display.  
RT/PTY/TP button (Asian model): Can be used when  
receiving the station transmitting text information.  
American model): Turns on/off the MUSIC OPTIMIZER  
function that improves the quality of the compressed  
audio.  
9
PURE AUDIO button and indicator (Asian model):  
Switches to the Pure Audio mode.  
 
15  
1
2
3
4
5
6
7
1 23  
4
9
5
6
7
8
Display  
Lights in the following conditions. "Z2": ZONE 2 output  
is on. / "HDMI": HDMI signals are input and HDMI input  
selector is selected. / "ARC": Audio signals are input  
from ARC compatible TV and TV/CD input selector  
is selected. / "3D": Input signals are 3D. / "USB" (¼):  
"USB" input is selected and USB storage device is  
connected. / "NET" (¼): "NET" input is selected and  
the unit is connected to the network. / "DIGITAL":  
Digital signals are input and the digital input selector is  
selected. / Cursor indicators: NET or USB is controlled.  
1
8
9
F
G H  
¼
"USB" and "NET" will flash if the connection is not correct.  
Lights when headphones are connected.  
Lights when NET or USB is controlled.  
Lights according to the type of input digital signals and  
the listening mode.  
Lights when Music Optimizer is enabled.  
Lights in the following conditions. "AUTO": Tuning mode  
is auto. / "fTUNEDe": Receiving AM/FM radio. fe  
flashes while tuning is automatically performed. / "FM  
STEREO": Receiving FM stereo. / "RDS" (Asian model):  
Receiving RDS broadcasting.  
2
3
4
Rear Panel  
ZONE 2 LINE OUT jacks: Audio output jacks connected  
to the pre-main amplifier for multi-zone playback in a  
separate room.  
SUBWOOFER PRE OUT jacks: A subwoofer with built-  
in amplifier is connected.  
1 RI REMOTE CONTROL jack: An Onkyo product with RI  
jack can be connected and synchronized with this unit.  
2 (/ꢀ#06'00#ꢀLCEMꢀꢁꢂꢃꢀŝꢄꢀCPFꢀ#/ꢀ#06'00#ꢀ  
terminal: The supplied antennas are connected.  
3 COMPONENT VIDEO IN and OUT jacks: Component  
video input/output jacks  
4 ETHERNET port: Used for LAN connection  
5 HDMI IN/OUT jacks: Digital video signals and audio  
signals are transmitted between the unit and the  
connected devices.  
6 SPEAKERS terminals: Speakers are connected.  
7 Power cord  
8 DIGITAL IN COAXIAL/OPTICAL jacks: Digital audio  
signals are input.  
9 COMPOSITE VIDEO/AUDIO IN jacks: Analog video  
G
H
5
6
"MUTING": Flashes when muting is on.  
7
8
Lights in the following conditions. "SLEEP": Sleep timer  
has been set. / "ASb" (Auto Standby): Auto Standby  
is on. / "ch": Channel is being set. / "Hz": Crossover  
frequencies are being set. / "m/ft": Speaker distances  
are being set. / "dB": Speaker volume is being set.  
Displays various information of the input signals.  
Pressing DISPLAY displays the type of input digital  
signals and the listening mode.  
9
signals and audio signals are input.  
COMPOSITE MONITOR OUT V jack: Video signals are  
F
output to the connected monitor or TV.  
 
16  
Troubleshooting  
HDMI control does not function correctly.  
rꢀ Set the CEC link function of the unit to on. It is also  
necessary to make the HDMI linked system setting on  
the TV. See the TV's instruction manual for details.  
Resetting the unit  
Before starting the procedure  
Problems may be solved by simply turning the power  
on/off or disconnecting/connecting the power cord,  
which is easier than working on the connection, setting  
and operating procedure. Try the simple measures  
on both the unit and the connected device. If the  
problem is that the video or audio is not output or the  
HDMI linked operation does not work, disconnecting/  
connecting the HDMI cable may solve it. When  
reconnecting, be careful not to wind the HDMI cable  
since if wound the HDMI cable may not fit well.  
After reconnecting, turn off and on the unit and the  
connected device.  
Resetting the unit to the status at the time of shipment may  
solve the problem. If the measures above do not solve the  
problem, reset the unit with the following procedure. If you  
reset the unit status, your preferences will be reset to the  
defaults. Note them down before starting reset.  
The remote controller does not work.  
rꢀ Be sure to press RCV first before operating the unit with  
the remote controller.  
z How to reset:  
While holding down CBL/SAT on the main unit (note  
that step 2 must be performed with this button  
pressed down)  
1.  
2.  
There is no sound for multi-zone function.  
rꢀ With multi-zone function, sound is output only when the  
signal input source is an external component connected  
to the analog audio input jacks of the unit, "NET", "USB"  
or "BLUETOOTH". Multi-zone playback is not possible if  
the player and the unit are connected via HDMI cable or  
digital cable. Connect the RCA audio output jacks of the  
player and the analog audio input jacks of the unit with  
analog audio cable. Also analog audio output setting may  
be necessary on the player.  
Press ON/STANDBY on the main unit ("Clear"  
z
appears on the display and the unit returns to  
standby)  
The AV receiver turns off unexpectedly.  
rꢀ The AV receiver will automatically enter standby mode  
when Auto Standby is set and launched.  
C l e ar  
There’s no sound, or it’s very quiet.  
rꢀ A wrong input selector button has been selected. Select  
a correct input for the player. Also check that muting is  
not on.  
Cannot access to network.  
rꢀ Try plugging/unplugging the unit or the wireless LAN  
router or check their power-on status. This will work well  
in many cases.  
rꢀ If the desired wireless LAN router is not in the access  
point list, it may be set to hide SSID or the ANY  
connection may be off. Change the setting and try again.  
Press ON/  
While holding  
2.  
z
1.  
rꢀ Not all listening modes use all speakers.  
STANDBY.  
down CBL/SAT,  
z How to reset the remote controller:  
There’s no picture.  
rꢀ A wrong input selector button has been selected.  
rꢀ Video is not displayed if the listening mode is Pure Audio.  
(Asian model)  
rꢀ To display video from the connected player on the TV  
screen while the unit is in standby, you need to enable  
HDMI Through function.  
rꢀ When the TV image is blurry or unclear, power cord or  
connection cables of the unit may have interfered. In  
that case, keep distance between TV antenna cable and  
cables of the unit.  
While holding down RCV on the remote controller,  
press HOME until the remote indicator lights (about  
3 seconds)  
1.  
Bluetooth  
rꢀ Try plugging/unplugging the unit and the Bluetooth-  
enabled player. After that, check that the Bluetooth  
function is enabled on the Bluetooth-enabled device and  
the connection with the unit has been established.  
Within 30 seconds, press RCV again  
2.  
Remote  
RCV  
indicator  
HOME  
 
17  
Specifications  
AM Tuning Frequency Range  
522/530 kHz - 1611/1710 kHz  
Preset Channel  
Dimensions (W × H × D)  
435 mm × 150 mm × 329 mm  
17-1/8" × 5-7/8" × 12-15/16"  
Weight  
Amplifier Section  
Rated Output Power  
All channels: 65 watts minimum continuous power per channel,  
8 ohm loads, 2 channels driven from 20 Hz to 20 kHz, with a  
maximum total harmonic distortion of 0.7% (FTC)  
90 watts minimum continuous power per channel, 6 ohm loads, 2  
channels driven at 1 kHz, with a maximum total harmonic distortion  
of 0.7% (FTC)  
(North American)  
5 ch × 100 W at 6 ohms, 1 kHz,  
1 ch driven of 1% (IEC) (Others)  
40  
7.6 kg (16.8 lbs.) (North American)  
8.1 kg (17.9 lbs.) (Others)  
Network Section  
Ethernet LAN  
10BASE-T/100BASE-TX  
Wireless LAN  
HDMI  
Input  
IN1 (BD/DVD), IN2 (CBL/SAT), IN3 (STB/DVR), IN4 (GAME), IN5 (PC),  
IN6  
IEEE 802.11 b/g/n standard  
(Wi-Fi® standard)  
Output  
OUT  
Video Resolution  
4K 60 Hz (YCbCr 4:2:0)  
Audio Format  
DTS-HD Master Audio, DTS-HD High Resolution Audio, Dolby TrueHD,  
Dolby Digital Plus, DSD, Multichannel PCM  
Supported  
Maximum Effective Output Power  
2.4 GHz band:  
5 ch × 120 W at 6 ohms, 1 kHz,  
1 ch driven (JEITA)  
(Asian)  
1 - 11 ch (North American)  
10 - 11 ch (Spain)  
10 - 13 ch (France)  
1 - 13 ch (Others)  
(Wi-Fi® standard)  
Dynamic Power (  
)
¼
IEC60268-Short-term maximum output power  
¼ꢀ  
ꢁꢂꢇꢀ9ꢀꢈꢉꢀŝꢆꢀ(TQPVꢊ  
ꢁꢋꢌꢀ9ꢀꢈꢍꢀŝꢆꢀ(TQPVꢊ  
ꢅꢌꢀ9ꢀꢈꢅꢀŝꢆꢀ(TQPVꢊ  
3D, Audio Return Channel, DeepColor, x.v.Color, LipSync, CEC (RIHD),  
4K Passthrough  
Bluetooth Section  
Communication system  
THD+N (Total Harmonic Distortion+Noise)  
0.7% (20 Hz - 20 kHz, half power)  
Damping Factor  
Video Inputs  
Bluetooth Specification version 2.1 +EDR (Enhanced Data Rate)  
Maximum communication range  
Line of sight approx. 15 m (¼)  
Frequency band  
2.4 GHz band (2.4000 GHz - 2.4835 GHz)  
Modulation method  
FHSS (Freq Hopping Spread Spectrum)  
Compatible Bluetooth profiles  
A2DP 1.2 (Advanced Audio Distribution Profile)  
AVRCP 1.3 (Audio Video Remote Control Profile)  
Supported Codecs  
Component  
IN (GAME)  
Composite  
IN1 (CBL/SAT), IN2 (STB/DVR), IN3 (GAME), AUX  
ꢂꢇꢀꢈ(TQPVꢆꢀꢁꢀM*\ꢆꢀꢅꢀŝꢊ  
Input Sensitivity and Impedance (Unbalance)  
ꢋꢇꢇꢀO8ꢎꢍꢏꢀMŝꢀꢈ.+0'ꢊ  
Rated RCA Output Level and Impedance  
ꢋꢇꢇꢀO8ꢎꢋꢃꢋꢀMŝꢀꢈ.+0'ꢀ176ꢊ  
Maximum RCA Output Level and Impedance  
ꢋꢀ8ꢎꢋꢃꢋꢀMŝꢀꢈ.+0'ꢀ176ꢊ  
Video Outputs  
Component  
OUT  
Composite  
Frequency Response  
MONITOR OUT  
5 Hz - 100 kHz/+1 dB, –3 dB (Direct mode)  
Tone Control Characteristics  
10 dB, 20 Hz (BASS)  
SBC  
Audio Inputs  
Transmission range (A2DP)  
Digital  
10 dB, 20 kHz (TREBLE)  
Signal to Noise Ratio  
100 dB (LINE, IHF-A)  
Speaker Impedance  
20 Hz - 20,000 Hz (Sampling frequency 44.1 kHz)  
¼ꢀ  
The actual range will vary depending on factors such as obstacles  
between devices, magnetic fields around a microwave oven, static  
electricity, cordless phone, reception sensitivity, antenna’s  
performance, operating system, software application, etc.  
OPTICAL (TV/CD)  
COAXIAL 1 (BD/DVD), 2 (CBL/SAT)  
Analog  
BD/DVD, CBL/SAT, STB/DVR, GAME, PC, TV/CD, AUX  
ꢂꢀŝꢀꢐꢀꢁꢂꢀŝ  
Audio Outputs  
Analog  
ZONE2 LINE OUT  
2 SUBWOOFER PRE OUT  
Speaker Outputs  
Video Section  
Input Sensitivity/Output Level and Impedance  
General  
Power Supply  
AC 120 V, 60 Hz (North American)  
AC 220 - 240 V, 50/60 Hz (Others)  
Power Consumption  
ꢁꢀ8RꢐRꢎꢏꢌꢀŝꢀꢈ%QORQPGPVꢀ;ꢊ  
ꢇꢃꢏꢀ8RꢐRꢎꢏꢌꢀŝꢀꢈ%QORQPGPVꢀ2B/CB, PR/CR)  
ꢁꢀ8RꢐRꢎꢏꢌꢀŝꢀꢈ%QORQUKVGꢊ  
Component Video Frequency Response  
5 Hz - 100 MHz/+0 dB, –3 dB  
FRONT L/R, CENTER, SURROUND L/R  
Phones  
PHONES (Front, ø 6.3)  
3.2 A (North American)  
380 W (Others)  
0.1 W (Stand-by, North American)  
0.2 W (Stand-by, Others)  
55 W (No-sound)  
Others  
Setup Mic  
RI  
1 (Front)  
1
Tuner Section  
FM Tuning Frequency Range  
USB  
1 (Front)  
1
Ethernet  
87.5 MHz - 107.9 MHz (North American)  
87.5 MHz - 108.0 MHz, RDS (Others)  
Specifications and features are subject to change without notice.  
 
18  
License and Trademark Information  
Manufactured under license from Dolby Laboratories. Dolby, Pro Logic and the  
double-D symbol are trademarks of Dolby Laboratories.  
SIRIUS, XM and all related marks and logos are trademarks of Sirius XM Radio  
Inc. and its subsidiaries. All rights reserved.  
DLNA®, the DLNA Logo and DLNA CERTIFIED® are trademarks, service  
marks, or certification marks of the Digital Living Network Alliance.  
Manufactured under license from DTS Licensing Limited. DTS, DTS-HD, the  
Symbol, & DTS and the Symbol together are registered trademarks of DTS,  
Inc. © DTS, Inc. All Rights Reserved.  
This product is protected by certain intellectual property rights of Microsoft. Use  
or distribution of such technology outside of this product is prohibited without a  
license from Microsoft.  
Windows and the Windows logo are trademarks of the Microsoft group of  
companies.  
QR Code is a registered trademark of DENSO WAVE INCORPORATED.  
"CINEMA FILTER" and "CINEMA FILTER (logo)" are trademarks of Onkyo  
Corporation.  
Safari is a trademark or registered trademark of Apple Computer, Inc. in the US  
and other countries.  
AccuEQ, Music Optimizer, RIHD and WRAT are trademarkds of Onkyo  
Corporation.  
"x.v.Color" is a trademark of Sony Corporation.  
"RIHD" and "RIHD (logo)" are trademarks of Onkyo Corporation.  
MPEG Layer-3 audio coding technology licensed from Fraunhofer IIS and  
Thomson.  
"All other trademarks are the property of theirrespective owners."  
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI  
Logo are trademarks or registered trademarks of HDMI Licensing LLC in the  
United States and other countries.  
The Wi-Fi CERTIFIED® Logo is a certification mark of the Wi-Fi Alliance.  
Wi-Fi certified® logo shows international association certifying interoperability  
"Wi-Fi alliance" ensures the product has passed the test for compatibility with  
other Wi-Fi certified equipment.  
The Bluetooth® word mark and logos are registered trademarks owned by  
Bluetooth SIG, Inc. and any use of such marks by Onkyo is under license.  
Other trademarks and trade names are those of their respective owners.  
Onkyo does not guarantee Bluetooth compatibility between the AV receiver and  
all Bluetooth-enabled devices.  
For compatibility between the AV receiver and another device with Bluetooth  
technology, consult the device’s documentation and dealer. In some countries,  
there may be restrictions on using Bluetooth devices. Check with your local  
authorities.  
InstaPrevue and the InstaPrevue logo are trademarks or registered trademarks  
of Silicon Image, Inc. in the United States and other countries.  
Apple, iPod and iPhone are trademarks of Apple Inc., registered in the U.S. and  
other countries.  
Apple TV is a trademark of Apple Inc., registered in the U.S. and other  
countries.  
 
19  
Kitahama Chuo Bldg, 2-2-22 Kitahama, Chuo-ku, OSAKA 541-0041, JAPAN  
The Americas  
18 Park Way, Upper Saddle River, N.J. 07458, U.S.A.  
For Dealer, Service, Order and all other Business Inquiries:  
Tel: 201-785-2600 Fax: 201-785-2650  
For Product Support Team Only:  
1-800-229-1687  
Europe  
Liegnitzerstrasse 6, 82194 Groebenzell, GERMANY  
Tel: +49-8142-4401-0 Fax: +49-8142-4208-213  
Meridien House, Ground floor, 69 - 71 Clarendon Road, Watford, Hertfordshire, WD17 1DS, United Kingdom  
Tel: +44 (0)8712-00-19-96 Fax: +44 (0)8712-00-19-95  
China  
(Hong Kong)  
Unit 1033, 10/F, Star House, No 3, Salisbury Road, Tsim Sha Tsui Kowloon, Hong Kong.  
Tel: 852-2429-3118 Fax: 852-2428-9039  
(Mainland)  
1301, 555 Tower, No.555 West NanJing Road, Jing’an District, Shanghai, China 200041,  
Tel: 86-21-52131366 Fax: 86-21-52130396  
Asia, Oceania, Middle East, Africa  
Please contact an Onkyo distributor referring to Onkyo SUPPORT site.  
The above-mentioned information is subject to change without prior notice.  
Visit the Onkyo web site for the latest update.  
D1406-0  
SN 29401839  
(C) Copyright 2014 Onkyo Corporation Japan. All rights reserved.  
* 2 9 4 0 1 8 3 9 *  
 

Miele Clothes Dryer T8428C User Manual
Milwaukee Saw 6177 59 User Manual
MTD Trimmer PS720 User Manual
Nikon Camcorder S4400 User Manual
Nortel Networks Cell Phone FD906931 User Manual
Nortel Networks Switch 8100 User Manual
Omnimount TV Mount OM10049 User Manual
Panasonic Car Speaker A110 User Manual
Panasonic Cordless Telephone KX TGB210BX User Manual
Parasound TV Converter Box D AC 1000 User Manual