Nady Systems Water System HM 10 User Manual

USER  
HM-10 Headmic™  
GUIDE  
Congratulations on purchasing the NADY HM-10 ultra small condenser headset  
microphone. Optimally designed for singing and speech applications, the HM-10’s small  
size and light weight make it ideal for all hands-free use with minimum visibility. Perfect for  
singers/musicians (drummers, keyboardists), vocal/dance performers, DJ’s,  
television announcers, public speakers, and aerobics instructors.  
STANDARD ITEMS SUPPLIED  
• HM-10 headmic with small foam windscreen  
• Additional medium and large foam windscreens  
• Extra boom assembly  
• User guide  
• Warranty card  
OPTIONAL ACCESSORIES  
• XM-10  
power to 5V-10V DC)  
Mini-XLR to XLR phantom power adaptor (converts 48V phantom  
• HM-CC1 — Plastic headmic carrying case  
FEATURES  
• Wide bandwidth, omni-directional electret condenser mic ensures clean transparent audio  
and enhanced vocal pickup with improved gain before feedback  
• Durable, thin metal frame can be easily molded to any user  
• Ergonomic design and comfortable fit with or without glasses, hats, or headphones (also  
no hairstyle hindrance)  
• Tiny capsule with diameter of 5.0 mm for lightest weight and hours of comfortable use  
• Three sizes of foam windscreen included to reduce wind and popping noise  
• Extendable boom fully adjustable 100 degrees for optimum mic capsule  
placement  
• Available with Mini-XLR or 3.5mm phono plug for wired and wireless applications (fits  
most standard wireless bodypack transmitters)  
• Choice of black or beige color  
SPECIFICATIONS  
Element: Back electret condenser  
Polar pattern: Omni-directional  
Frequency Response: 20Hz~20KHz  
Sensitivity: -42 3dB  
• Low voltage Phantom Power required  
Output impedance: 1KO 5%  
SPL max: 130dB  
USE & CARE  
Power Supply: 1.5-10V D.C.  
Cable: 1.5mm  
The headset’s arch-shaped rests are placed over each ear and the remainder of the band  
extends around the back of the head just above the neck. The tip of the supporting arches  
rests on the temple just in front of the ear providing the necessary stability during use. The  
mic boom descends from the ear on the left side.  
Wiring: GND = Pin 1, Hot (+) = Pin 3 2K➾  
Pin 2  
Weight: 1.65 oz. (23g)  
Mic Dimension: .197” (5 mm)  
Output connector: 3pin mini XLR connector  
Carefully loosen the boom by unscrewing the assembly one-quarter turn. Place the  
microphone capsule close to the mouth to a favorable audio position. Tighten the boom  
assembly. Bend the boom and headset slightly for optimum fit.  
Specifications and design subject to change for  
improvement purposes without prior notice.  
FREQUENCY RESPONSE &  
POLAR PATTERN  
Connect the Mini-XLR or 3.5mm phono plug of the microphone cable to the input jack of  
the bodypack transmitter or power supply adaptor. When using a power supply adaptor,  
connect it to the microphone input of an audio preamp that provides phantom power.  
+20  
+10  
0
-10  
-20  
20  
50  
100  
500  
1k  
10k  
20k  
The entire HM-10 assembly has been moisture-proofed to guard against deterioration  
during use. After use in a high moisture application such as aerobics or a stage  
performance, remove the foam screen, wipe the headset with a dry soft cloth and permit it  
to air-dry. Do not store the unit in a closed space (e.g., a plastic bag) until all moisture has  
evaporated, and avoid conditions of extremely high humidity. This will help maintain the  
HM-10’s excellent performance. While the HM-10 is not unusually sensitive to the outside  
environment, extremes in temperature can be harmful. Avoid, for example, leaving the  
microphone in direct sunlight for long periods of time.  
Frequency in Hz  
SERVICE FOR YOUR NADY AUDIO PRODUCT  
(U.S.) Should your NADY AUDIO product require service, please contact the Nady  
Service Department via telephone at (510) 652-2411, or e-mail to [email protected].  
NADY SYSTEMS, Inc.  
6701 Shellmound Street  
Emeryville, California 94608  
Phone: 510.652.2411 • Fax: 510.652.5075  
(International) For service, please contact the NADY AUDIO distributor in your country  
through the dealer from whom you purchased this product.  
 

MTD Snow Blower 31AE640F352 User Manual
Napoleon Grills Gas Grill BIPT450 User Manual
National Instruments Stepper Machine NI MID 760X User Manual
NETGEAR Network Hardware STM300EW 100NAS User Manual
NETGEAR Network Hardware XAVB5101 100PAS User Manual
NeumannBerlin Microphone U 64 User Manual
Niles Audio Universal Remote RHS 1 User Manual
Oreck Vacuum Cleaner 2310RS User Manual
Palm Bluetooth Headset 3265WW User Manual
Patton electronic IP Phone 4970 4980 4990 User Manual